Jump to content
CaddyInfo Cadillac Forum

cancelling cam part number


rockfangd

Recommended Posts

Hi all.

I am looking for the cancelling cam for my 1997 Deville.

I can find up to 1996 but not 1997. Not sure if it is different in 97. 

I dont want to take column apart til I know I have the right part.

My horn is not working again and I am sure the clip broke off the cam

GM FAN FOREVER

Nice, clean, luxury= fine automobile

Link to comment
Share on other sites


The white plastic piece the horn wire engages into? The turn signal not cancelling was a broken spring usually.

Link to comment
Share on other sites

the cancelling portion works fine but the shaft for the horn wire broke and the spring just pushes it off

cam.jpg

GM FAN FOREVER

Nice, clean, luxury= fine automobile

Link to comment
Share on other sites

@rockfangd

If it is the part you have pictured it is 26059701 

The spring loaded contact wire that twist locks into the piece pictured is 16757251

 

THERE IS ALWAYS ENOUGH TIME TO DO THE JOB RIGHT - THERE IS NEVER ENOUGH TIME TO DO THE JOB AGAIN !!!

Link to comment
Share on other sites

Thanks.

Pictured one is what I need.

The part at the end of the shaft breaks off because of the constant spring tension and then the horn wont work

GM FAN FOREVER

Nice, clean, luxury= fine automobile

Link to comment
Share on other sites

  • 4 weeks later...

Well I have the kit to fix the horn issue but my picky self am waiting for a nice uncovered steering wheel.

Needle in a haystack I am sure we all know.

I actually found that the 2000-01 ETC has a wood grain steering wheel with my same column (eldo kept the same saginaw  as the 90s) but Probably even harder to find.

I seem to have found a wheel that is supposed to be mint and am keeping my fingers crossed. Once I have a wheel I am satisfied with I will pull everything

GM FAN FOREVER

Nice, clean, luxury= fine automobile

Link to comment
Share on other sites

  • 2 weeks later...

so good news and bad news.

I replaced the cancelling cam kit, and the steering wheel.

Love the wheel. 

Horn is still not really working though,

GM had a bad run of airbags around mid 90s and it sucks. The original one used to blow randomly, I had a spare one from my 96 and that one barely works, Cant win. Cant buy one, (I have tried) 

GM did recall some but I dont think that would do me any good now.

I think the only thing I can do is find a 98 or 99 and disassemble the pad from the airbag and reassemble it into  mine. Hate to do it but not sure what else to do.

When I had my 96  I put a 98 one in that I got lucky enough to get and it never gave me another issue. I need to do that again

GM FAN FOREVER

Nice, clean, luxury= fine automobile

Link to comment
Share on other sites

So to update this. 

I may have figured a way around things to get the horn buttons working. I may have to start a new thread on it though.

I will post my fix with photos once it is done and hopefully works:hatsoff:

GM FAN FOREVER

Nice, clean, luxury= fine automobile

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...