Hey I'm not 100 percent sure, yet but might have inlet gasket leak . Water pump was done last year, not ruling out the possibility. Leak is dripping down control arm through the insulator rod. Lower radiator hose when squeezed it appears to push out more coolant. I am replacing what seems to be original hose dry rotted. Looking in the FSM book in water pump section where the breakdown of waterpump assembly the water pump bold orientation "D" in the service manual on the lower side seems to
The water pump inlet #5 would be my first suspect. The inlets rust/corrode from the inside. The water pump also leaks onto the same areas mentioned above by the PM.
The heater hose piping, also #5 in the above pic, is a common source of a coolant leak as well.