going strong Posted August 20, 2016 Report Share Posted August 20, 2016 I'm trying to remove my front bench seat in my 74' coupe deville. Removed the two front bolts and one in the rear on both sides. The seat will rock back and forth but can not be lifted up. I've searched along the rail but can not find anymore bolts. Any ideas? Thanks. Link to comment Share on other sites More sharing options...
KHE Posted August 20, 2016 Report Share Posted August 20, 2016 It sounds like you have all the nuts removed - there should be only two anchor points per side. Is it possible the seat brackets are rusted to the floor panel? going strong 1 Kevin '93 Fleetwood Brougham '05 Deville '04 Deville 2013 Silverado Z71 Link to comment Share on other sites More sharing options...
rockfangd Posted August 21, 2016 Report Share Posted August 21, 2016 There may be a bar that runs over the hump from the driver side to the passenger side. Check it for screws. I may be a little rusty but I have done quite a few seats. GM FAN FOREVER Nice, clean, luxury= fine automobile Link to comment Share on other sites More sharing options...
Recommended Posts