bschelle Posted December 24, 2004 Report Share Posted December 24, 2004 My core was plugged solid. Couldn't get it to flush so I removed the old one (a story by itself) and put the new one in (NAPA $47.00) and now I can't imagine anyway to get the hoses back on the core. There is not ANY room to get my hands in there!!! How the *ell do you get those buggers on? I tried long needle nose, chunks of wood whatever but no luck. I need HELP! Link to comment Share on other sites More sharing options...
adallak Posted December 24, 2004 Report Share Posted December 24, 2004 There is a part containing a black rubber canister (looks like a half of a syringe) with an attached actuator. If you remove it you'll make a little bit more room to access the hoses. Use common techniques like wetting the hoses before attaching and positioning the clamps so that you could turn the screws with a screwdriver. Be patient! The saddest thing in life is wasted talent Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.