banknotes Posted August 20, 2013 Report Share Posted August 20, 2013 Ive replaced the oem shocks with Monroe air shocks, couldn't take out the old dampening magnets from the oem shock since they were too corroded so I had to cut the wires- does anyone know what specific resistors I can solder in to prevent the msg from keep coming up on the display?? Link to comment Share on other sites More sharing options...
joeb Posted August 27, 2013 Report Share Posted August 27, 2013 I used resistor for my 96. I think 97 is different value. So ur rear will have NEW firm ride and front will be worn stuff? My RF solenoid failed so I got error message. I put in resistor but still have original struts. Link to comment Share on other sites More sharing options...
KHE Posted August 27, 2013 Report Share Posted August 27, 2013 Ive replaced the oem shocks with Monroe air shocks, couldn't take out the old dampening magnets from the oem shock since they were too corroded so I had to cut the wires- does anyone know what specific resistors I can solder in to prevent the msg from keep coming up on the display?? 4700 ohm or 4.7 K-ohm. Be sure to seal the connections to keep the water out. I used electrical tape coated with PVC pipe cement to ment/seal the tape together. Kevin '93 Fleetwood Brougham '05 Deville '04 Deville 2013 Silverado Z71 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.