msedc Posted November 7, 2004 Report Share Posted November 7, 2004 I just replaced my burnt out blower motor with a salvage blower motor. It works but on high it vibrates and make alot of noise. Is this a bad motor or is it out of balance? Any thoughts? Link to comment Share on other sites More sharing options...
Poobah Posted November 7, 2004 Report Share Posted November 7, 2004 Without a decibel meter reading, it's hard to say how loud is noisy. I always keep my blower on "auto/low" because even on "auto" it gets uncomfortably noisy. Fortunately, I live in an area with a mild climate and don't need the higher volumes of air flow. Happiness is owning a Cadillac with no codes. Link to comment Share on other sites More sharing options...
franey Posted November 7, 2004 Report Share Posted November 7, 2004 EITHER way , your going to need a new assembly. Sounds like bad motor bearings. Link to comment Share on other sites More sharing options...
bigfoo Posted November 7, 2004 Report Share Posted November 7, 2004 I think they all do this..even mine does it.. sigh Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.