Jump to content
CaddyInfo Cadillac Forum

Recommended Posts

About amonth or so ago, somebody here indicated how to check your map sensor using the DIC and provided the correct kPa being +/- 10? Does this sound about right? I checked mine then and it was fine but For some reason I've forgotten the procedure, and just want to check again...hopefully this is making sense. Thanks in advance,1994 STS

look1-1-1.jpg
Link to comment
Share on other sites


Hi Scott, I had a 94 sts...miss that car... to access all the diag data, i believe you hold down the "econ" and "fan blower down" at the same time, holding them both down for about 3-5 seconds, and that accesses the diags. Pretty sure it is a combination of two keys on that side of your inst cluster. Once in the diags, you cycle up and down through various menus using the "blower up/down" and "econ" as the "enter" function.

I am going from memory here, i gave that car to my daughter about 6 years ago, so forgive me if I'm mistaken. But I know it is possible to read that sensor. I bought a shop manual off ebay (about 10 bucks) and it had full discription of DIC functionality.

good luck

Paul

Link to comment
Share on other sites

I know what you are looking for and just saw it posted the other day. I think it was at cadillac forums, but I've been unable to locate it. If I run across it again I'll post it.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...