jkypes Posted August 31, 2004 Report Share Posted August 31, 2004 has anyone ever had this problem? my 93 sts was in drive and all the sudden while in cruise it started revving really high because the it went out of gear. then the check engine light came on. i had to put it in 3 to drive home, and that didnt even work the whole time either. please help! jason Link to comment Share on other sites More sharing options...
adallak Posted August 31, 2004 Report Share Posted August 31, 2004 press warmer and off simultaneously for a few seconds and write down the trouble codes you will see on Driver Iformation Center. Post the codes The saddest thing in life is wasted talent Link to comment Share on other sites More sharing options...
PAUL T Posted August 31, 2004 Report Share Posted August 31, 2004 I would say you will find a code for the shift solenoids. Lots of info in the archives. Easy fix. Link to comment Share on other sites More sharing options...
jkypes Posted August 31, 2004 Author Report Share Posted August 31, 2004 ok i checked and the codes i got were SO44 and PO94. i think one of those is for the shift solenoids but they were replaced right before i bought the car. please help! jason Link to comment Share on other sites More sharing options...
jgr7 Posted August 31, 2004 Report Share Posted August 31, 2004 The SO44 is lift and dive signal fault, not sure right off the top of my head about the other. Jeff Link to comment Share on other sites More sharing options...
KenD Posted August 31, 2004 Report Share Posted August 31, 2004 Here is the other. Take the car back to wherever they were replaced and get them to recheck their work. P094 (E094) ........... Transaxle Shift "A" Solenoid Problem (Vehicle Speed Sensor) 1994 STS Pearl White 260,000 KM (163,000 miles) <img src="http://img45.photobucket.com/albums/v137/caesar/caddycaesar.jpg" border="0" class="linked-sig-image" /> Link to comment Share on other sites More sharing options...
jkypes Posted August 31, 2004 Author Report Share Posted August 31, 2004 whats a dive signal fault mean? - i just talked to the tranny shop where the work was done and they said that the reason the tranny was doing that was that the second gear clutch was worn and it would slip. they said to rebuild the whole tranny would be between 2500 and 3200. any suggestions? jason Link to comment Share on other sites More sharing options...
PAUL T Posted August 31, 2004 Report Share Posted August 31, 2004 S044 - lift/dive signal fault - This pertains to the Road Sensing Suspension and should not have anything to do with your transmission it only affects your ride. I would clear the codes and drive it again to see if the P094 comes back. If it does take it back to where the solenoids were put in and have them check them if possible. Solenoids done right should last a long time. There could just be a wire pinched or shorted out. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.