scott y Posted April 16, 2010 Report Share Posted April 16, 2010 This coming tuesday I will be picking up myrear upper and lower control arm bushings(94 STS). They will likely be off shore quality???!!! Napa sells each set for $75 plus tax, hopefully all will go well to get rid of that annoying right rear clunk/racket!! Link to comment Share on other sites More sharing options...
BodybyFisher Posted April 16, 2010 Report Share Posted April 16, 2010 Wait for KHE (Kevin) he has some information on this that might help. He replaced his I had tried to get MOOG to produce a solution with no success, but it appears that there are a few solutions now http://caddyinfo.ipb...showtopic=12526 Pre-1995 - DTC codes OBD1 >> 1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/ Cadillac History & Specifications Year by Year http://www.motorera.com/cadillac/index.htm Link to comment Share on other sites More sharing options...
KHE Posted April 16, 2010 Report Share Posted April 16, 2010 Rockauto and Advance Auto Parts sells Dorman Knuckle bushings for $38.00 and $57.00 respectively per side. You could also check Napa to see if they have the Moog bushings available by now. Kevin '93 Fleetwood Brougham '05 Deville '04 Deville 2013 Silverado Z71 Link to comment Share on other sites More sharing options...
scott y Posted April 16, 2010 Author Report Share Posted April 16, 2010 Thanks for the info guys,also excellent photogs of your tear down BBF. Apparentely I'm getting DANA parts from NAPA Link to comment Share on other sites More sharing options...
KHE Posted April 16, 2010 Report Share Posted April 16, 2010 Thanks for the info guys,also excellent photogs of your tear down BBF. Apparentely I'm getting DANA parts from NAPA Dana is a good brand. How much do the bushings cost at Napa? I need to do the other side of my STS in a few months. Kevin '93 Fleetwood Brougham '05 Deville '04 Deville 2013 Silverado Z71 Link to comment Share on other sites More sharing options...
BodybyFisher Posted April 16, 2010 Report Share Posted April 16, 2010 glad to help, keep us updated, I need to do the same job Pre-1995 - DTC codes OBD1 >> 1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/ Cadillac History & Specifications Year by Year http://www.motorera.com/cadillac/index.htm Link to comment Share on other sites More sharing options...
scott y Posted April 16, 2010 Author Report Share Posted April 16, 2010 In my neck of the woods(Oshawa ONT) Napa wants $75+tx/side. Link to comment Share on other sites More sharing options...
lothos Posted April 17, 2010 Report Share Posted April 17, 2010 Are these the bushings for the rear that required the whole knuckle replacement because nobody made bushings? If so I need to do mine as well. They need to be pressed in, right? WARNING: I'm a total car newbie, don't be surprised if I ask a stupid question! Just trying to learn. Cheers! 5% discount code at RockAuto.com - click here for your discount! Link to comment Share on other sites More sharing options...
scott y Posted April 17, 2010 Author Report Share Posted April 17, 2010 I don't know if they need to be pressed in or not. I'm going to try an air hammer to remove them, maybe if protected enough I can push them back in if needed. I'm gonna find out Tuesday...I post the experience Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.