petrov Posted March 5, 2010 Report Share Posted March 5, 2010 Mike is helping me with a 93 Seville STS RH rear control arm replacement and I need to replace the associated ride level sensor as well. Does any one know if the sensor is the same on a 93 Seville STS & a Deville?? I have included a picture from a great slide presentation (George & Shirley) that showed the procedure of replacing the OEM shock with a kit from Arnott... Link to comment Share on other sites More sharing options...
petrov Posted March 9, 2010 Author Report Share Posted March 9, 2010 GM parts told me that k-body with engine code 9 will be compatible for this part. Link to comment Share on other sites More sharing options...
BodybyFisher Posted March 9, 2010 Report Share Posted March 9, 2010 GM parts told me that k-body with engine code 9 will be compatible for this part. That sounds like the 93 Deville part will not fit I have a bunch of scrap yards near me, Ill run by them tomorrow to see if I can find yours Pre-1995 - DTC codes OBD1 >> 1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/ Cadillac History & Specifications Year by Year http://www.motorera.com/cadillac/index.htm Link to comment Share on other sites More sharing options...
petrov Posted March 9, 2010 Author Report Share Posted March 9, 2010 Ok cool Mike, I am not overly worried if it doesn't pan out as I can make due with the existing sensor. The most important thing obviously is to replace the bent control arm. Link to comment Share on other sites More sharing options...
BodybyFisher Posted March 9, 2010 Report Share Posted March 9, 2010 So is that all you need is the control rod for it, or is the level sensor bad? maybe I can find a control rod if that is all you need Pre-1995 - DTC codes OBD1 >> 1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/ Cadillac History & Specifications Year by Year http://www.motorera.com/cadillac/index.htm Link to comment Share on other sites More sharing options...
petrov Posted March 10, 2010 Author Report Share Posted March 10, 2010 It is just the control rod that is broken inside the sleeve and the sensor is fine. So that would work if you came up with a rod. Link to comment Share on other sites More sharing options...
petrov Posted March 28, 2010 Author Report Share Posted March 28, 2010 Here is a few shot of the broken arm... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.