usvet2 Posted October 17, 2009 Report Share Posted October 17, 2009 My Rke entry quit. I have changed the batteries attempted to reprogam remote when i use jumper wire the doors will lock and unlock. When i push remote they will unlock once then nothing. Has anyone had this problem. Everything else on car is working. I have read that the trunk should open when the jumper wire is in place mine does not. What can cause this is this part of the problem how can i test the RKE module while its still in car. Link to comment Share on other sites More sharing options...
winterset Posted October 18, 2009 Report Share Posted October 18, 2009 I had a problem with my RKE too. a while ago, one FOB stopped working, then the other a short while after. I tried batteries, reprogramming etc. not sure what prompted me to look, but there is a white "resistor" soldered on the FOB board, and one of the pins on each broke. I took out my weller soldering gun, re-soldered the pin, and they work great now. I noticed newer FOB's, don't have this componant anymore. I suspect this fragile pin broke as I kept having to clean the contacts from the rubber buttons wearing out. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.