Jump to content
CaddyInfo Cadillac Forum

service engine soon light


sndnappi

Recommended Posts

my service engine soon light came on today while i was driving is there anywhere on my information display screen that it can tell me why? for instance when my ac leaked out it said "refriggerant very low ac compressor off"

and when i turn the car on it says "monitoring systems ok"

Link to comment
Share on other sites


Your Cadillac has onboard diagnostics which can help us to understand why the service engine light is on. Please refer to the How-to section here:

http://www.caddyinfo.com/readingcodes.html

and post any history and current codes you find, noting which are history and which are current.

Bruce

2023 Cadillac CT4-V Blackwing

Follow me on: Twitter Instagram Youtube

Link to comment
Share on other sites

thank you

history codes are

p013

p046

p052

current codes are

p048

p055

a047

then it said

no ipc codes

no sir codes

and then it finished off with

pcm?

what does all this mean

P013 Rear Heated Oxygen Sensor not ready

P046 Front to Rear Bank Fueling Difference

P052 PCM Keep Alive Memory Reset - You probably disconnected your battery at one point.

P048 EGR System Malfunction

P055 Closed Throttle Angle out of range

A047 Low refrigerant

WARNING: I'm a total car newbie, don't be surprised if I ask a stupid question! Just trying to learn.

Cheers!

5% discount code at RockAuto.com - click here for your discount!

Link to comment
Share on other sites

i understand ao47 because my ac is not working

i think that i understand po55 because my throttle sticks i need a new idle speed control motor

but what does po48 mean and what does pcm? mean and how do i turn the service light off?

Link to comment
Share on other sites

Try cleaning the TB bore and throttle plate before you replace anything. Remember to rod out the EGR tubes down in the TB. That may be the cause of the P048.

If you answer yes to PCM? you get into the PCM mode where you can then go into the data and override modes. In the data mode you can see things like RPM, engine temp, O2 sensor cross counts, and many many other observations that can be com[pared to the FSM parameters to tell if things are working as designed. Override mode obviously lets you override things, like shutting off injectors one by one to test them just to name one.

Link to comment
Share on other sites

If this is all Greek to you, stay out of the PCM mode. It's most likely P048 and P055 that turned the light on. You make the light go off by repairing what turned it on. EGR malfunction means just that. The EGR system is no functioning properly. Start by cleaning the TB and EGR tubes. Then you can clear the codes and see if they return.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...