rocky2 Posted May 9, 2004 Report Share Posted May 9, 2004 Any one know of a substitute belt for a 4.9 so I could bypass the A/C compressor? Thanks guys! Link to comment Share on other sites More sharing options...
up2ng Posted May 10, 2004 Report Share Posted May 10, 2004 They do make one, search this board for it. I believe the person was looking for a Seville with a 4.5. Link to comment Share on other sites More sharing options...
MAC Posted May 10, 2004 Report Share Posted May 10, 2004 I know of one member (Bentham) who may be able to help you. http://caddyinfo.ipbhost.com/index.php?sho...c=953&hl=bypass You may be able to reach him via email. MAC Link to comment Share on other sites More sharing options...
Bentham Posted May 10, 2004 Report Share Posted May 10, 2004 Here I am! I don't remember the exact size, as it was almost 2 years ago. Just take a piece of string and run it along the maze [without] going around the AC Compressor Then go to autozone, and tell them what you measured..,they should be able to give you a belt fairly close, the belt tensioner will pick up any slack in the belt. I think the belt was under $20. Good luck! -Eric Eric 93 Cad Seville 100K 95 Chev Blazer 143K [garaged summers] Link to comment Share on other sites More sharing options...
Julio Posted May 10, 2004 Report Share Posted May 10, 2004 I think you'll run into problem bypassing the compressor you may obtain a knock or bang I remember reading it on the board some time ago let me know how it goes. Julio Link to comment Share on other sites More sharing options...
Bentham Posted May 10, 2004 Report Share Posted May 10, 2004 I have yet to hear any 'knocking or banging' the only annoyance is if you're running heat, you'' get the A/C Compressor OFF, LOW REFRIGERANT' message -Eric Eric 93 Cad Seville 100K 95 Chev Blazer 143K [garaged summers] Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.