Jump to content
CaddyInfo Cadillac Forum

VENT CONTROLS


Recommended Posts


HEAT AND AIR CONDITIONER VENT CONTROLS ONLY WORK IN THE PASENGER SETTING.WONT WORK IN FLOOR OR DEFROST SETTING.ALSO PASSENGER SIDE TEMP CONTROL DOSENT WORK.WHAT COULD BE THE CAUSE.

Check your codes, you might get a code from a bad actuator and we will be able to direct you to exactly what is wrong

Go to the top of this page click HOW TO, then click DTC Codes and follow the directions to retrieve the codes. Bring a pencil and paper write them down and post them here, we will help you with them.. Mike

Welcome aboard on your first post

Pre-1995 - DTC codes OBD1  >>

1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm

How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/

Cadillac History & Specifications Year by Year  http://www.motorera.com/cadillac/index.htm

Link to comment
Share on other sites

I'm a bit slow about this sort of thing, but many before me have benefited by running the temperature control up to 90 and then back to 60 to see if performance had changed.

From your description, I wouldn't expect it to solve your problem, though it might help.

Just the same, it would be a good exercise to perform before reading the Diagnostic Trouble Codes (DTCs).

Regards,

Warren

Posted Image

There is no means of avoiding the final collapse of a boom brought about by credit expansion. The alternative is only whether the crisis should come sooner as the result of a voluntary abandonment of further credit expansion, or later as a final and total catastrophe of the currency system involved. - Ludwig von Mises

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...