Jump to content
CaddyInfo Cadillac Forum

Changing the Headgasket of a 97 Seville SLS


Recommended Posts

Vise Grips clamped firmly clamped on the dowel, then hold the vise grips and tap the bottom with a hammer should work.

I just grabbed them with Channel Lock Pliers and rocked them back and forth, pulling up at the same time.

While the dowels can probably be cleaned up and used again, it would be best to replace them.

I would not knock the dowels with a punch in an attempt to loosen them. This could easily severly damage the deck surface, either by distorting the dowel holding area or an accidental hammer strike to the deck.

-George

Drive'em like you own 'em. - ....................04 DTS............................

DTS_Signature.jpg

Link to comment
Share on other sites


Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...