PAUL T Posted December 13, 2007 Report Share Posted December 13, 2007 I have not been driving my 94 Concours much since I discovered it was leaking antifreeze. I decided to drive it yesterday and noticed that the booster seat that I have for my daughter on the back drivers side was wet. I lifted the booster seat and the leather was wet and molded. I first suspected the sunroof but I could not find any signs of that leaking. Then, while I was standing with the door open, I noticed the inside molding around the door had shrunk and the corners were not sealed. This let the water drip down directly on to the seat. I stretched the seal out and am going to try to silicone it to the door frame to keep it from pulling away and leaking again. Anyway my question is what should I use to clean the leather of the mold, and what should I use to keep the seat from cracking? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.