Jump to content

Rear Caliper Retract


Recommended Posts

I've found an EASY method to retract the rear caliper pistons. I do have the "Cube" and have used it several times. Once, with "Hand Power".....Ratchet/extension, the rest with an impact gun. NONE was as easy as what I stumbled upon.

I started with the right/rear. In order as follows:

Mity-vac out the brake fluid until nice and clear.

Top off the master cylinder and tighten the cap.

Remove caliper, pads, and rotor.

Reinstall the caliper with bolts finger tight.

Mity-vac out some more fluid (about a half of the mity-vac container)WITH the MC cap on tight. This should pull down on the ruber membrane of the MC cap.

Tighten caliper bleeder screw.

Pump the Mity-vac for max vacuum (at least 25 in.HG).

Loosen bleeder screw and twist in the piston with needle nose pliers.

The added "Pull" from the mity-vac, while pushing in with the pliers, allowed me to fully compress the piston in less than ONE turn! Don't forget to have the "V's" at 12 and 6 O'Clock, in relation to the caliper, before you install the pads.

rek

Link to comment
Share on other sites

  • 3 years later...

I realize this is a super old thread, so I apologize, but let me add this...

I tried the Original poster's idea with no results.

The only thing that worked for me was to:

1. open the bleeder

2. Push in HARD while you are turning the piston. Haaaarrdd.

3. When it turns, if you are pushing hard enough, a squirt of brake fluid will come out the bleeder, and the piston will go in some.

4. Repeat steps 2 & 3 until the piston is far enough in to get your new pads onto your new rotors.

5. When it's all back together, use your mighty vac to re-bleed as normal.

Enjoy.

Edited by Patrick7997
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...