Jump to content
CaddyInfo Cadillac Forum

remote function actuation module


franey

Recommended Posts

A while back another individual posted a how to article on increasing the distance that y0ur remote would work by extending an antenna wire from the actuator into the trunk , I would like to do this but am having trouble finding article. ANy help would greatly be appreciated.

THANK YOU FOR YOUR HELP.

FLOYD RANEY

Link to comment
Share on other sites


That topic was probably lost in one of the host site changes. I modified my RKE module and think I still have the pictures. What I did is specific to the '98 - '05 Seville equipment; is that what you have??

Jim

Drive your car.

Use your cell phone.

CHOOSE ONE !

Link to comment
Share on other sites

Sorry but we have different RKE modules. Post a couple of pix of the circuit board and the case and maybe there will be a visible clue.

Jim

Drive your car.

Use your cell phone.

CHOOSE ONE !

Link to comment
Share on other sites

I used a fm antenna for a house radio with a two foot connecting wire, solder the end of the wire to the end of the built in antenna and drilled a small hole in the end of the control box and went through the back of the back panel into the trunk where i had mounted the square fm antenna to the bottom of the rear package tray, between the two rear speakers. Now i can open or lock my doors from around 50 to 60 feet. Before even with a new battery , you were lucky to get it to work right beside the car.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...