MAC Posted June 4, 2005 Report Share Posted June 4, 2005 I would like to install a limited slip differential. Can it be done without removing the transaxle. http://www.phantomgrip.com/ Link to comment Share on other sites More sharing options...
MAC Posted June 4, 2005 Author Report Share Posted June 4, 2005 Here's something I found that's looks like it could help prevent the P039 code. I also read a post where transmission problems were being caused by a corroded TCC wire at the transaxle connection. So, tomorrow I'm going to pull the transaxle harness apart and clean the connections. Interceptor! Electronic Modulator - Increase transmission line pressure reducing burnt clutches & bands - Delay the timing of the application of the torque converter clutch eliminating TCC shudder, chug & stress, and engine bogging when pulling loads - Eliminates the need to install complicated "valve body kits" - Compatible with specific computer controlled transmission applications - For the do it yourself (DIY) mechanic Plugin installation! http://www.drivetrain.com/autotranscontrol...r.html#CADILLAC Link to comment Share on other sites More sharing options...
acklac7 Posted June 5, 2005 Report Share Posted June 5, 2005 So I guess the LSD will cure the torque steer issues in 1st gear?.....Wish I would have known about it before I had my tranny rebuilt...Id give anything to eliminate that dreaded 1st gear torque steer....Also took a look at the interceptor....Guru you got any comments? A.J. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.