Jump to content
CaddyInfo Cadillac Forum

US made front hub/bearing assembly ?


Recommended Posts

Can anybody tell me a source for US made Front bearing/hub part # 513121 ?

Fits many GM vehicles including my 2000 Eldo.

I ordered a Timken off Amazon & even though most reviews said "Made in the USA"

this one says S Korea

 

Link to comment
Share on other sites


Well I checked Mac's thread again, I now believe my hub is genuine Timken

just made in Korea. Still, I contacted Amazon and asked for a replacement.

Below is my bearing & Mac's, his knock off first, note on mine it is flush

513_H.png

 

 

513_F.png

Link to comment
Share on other sites

JUst my 2 cents.

I used to use nothing but Timken, until they started outsourcing and dropped their warranty down to 1 year.

Last 5 years I have been using MOOG and have had no come backs. Also have 3 year warranty.

Very good quality. I should know as I have done tons of hub assemblies and hub bearings.

GM FAN FOREVER

Nice, clean, luxury= fine automobile

Link to comment
Share on other sites

8 hours ago, rockfangd said:

JUst my 2 cents.

I used to use nothing but Timken, until they started outsourcing and dropped their warranty down to 1 year.

Last 5 years I have been using MOOG and have had no come backs. Also have 3 year warranty.

Very good quality. I should know as I have done tons of hub assemblies and hub bearings.

Thank you rock, I've been retired for the last 5 years, appreciate your experience with these parts.

If the replacement Timken is not US made I'll check local parts stores that carry Moog for US made hubs.

I understand even Moog has some Asian sources.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...