Jump to content
CaddyInfo Cadillac Forum

Recommended Posts

Hi I have a power steering issue. I have replaced all the lines rubber and steel, replaced the pump, the reservoir, so I am at a loss... I still lose fluid, I think it is still pushing out the res cap, with the car running I have a nice little stream of fluid rising up under the cap, so I am guessing when the car is running down the road the stream is a lot stronger and pushing past the seal on the cap. Is there some way to change the pressure valve setting? Thanks for your help

 

Link to comment
Share on other sites


Has the cap itself  been replaced?

Pre-1995 - DTC codes OBD1  >>

1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm

How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/

Cadillac History & Specifications Year by Year  http://www.motorera.com/cadillac/index.htm

Link to comment
Share on other sites

Maybe the reservoir is clogged (screen?) or perhaps the power steering cooler is blocked, which is causing pressure to build up. 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...