janetkid Posted September 22, 2011 Report Share Posted September 22, 2011 I am replacing the tensionar in my 2000 DTS. The paper that came with the replacement part says to, "Torque mounting bolt to the proper value as given in the Original Equipment Service Manual." Problem being... I have no Original Service Manual. PLEASE help me! Thank you... Link to comment Share on other sites More sharing options...
BodybyFisher Posted September 22, 2011 Report Share Posted September 22, 2011 This is from the manual for your year, 50 N·m or 37 lb ft Good Luck, let me know if I can help Pre-1995 - DTC codes OBD1 >> 1996 and newer - DTC codes OBD2 >> https://www.obd-codes.com/trouble_codes/gm/obd_codes.htm How to check for codes Caddyinfo How To Technical Archive >> http://www.caddyinfo.com/wordpress/cadillac-how-to-faq/ Cadillac History & Specifications Year by Year http://www.motorera.com/cadillac/index.htm Link to comment Share on other sites More sharing options...
janetkid Posted September 22, 2011 Author Report Share Posted September 22, 2011 Thank you for your reply. I'll take you up on that offer to help. I will even put you in my will if you would actually come and finish it for me... Just trying to get the old mounting bolt out has been WAY more time-consuming than I thought. There is ZERO room to work with. I have said more four-letter words today than I have in the past year... seriously. Once again, thank you for answering my post. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.