Jump to content
CaddyInfo Cadillac Forum

bschelle

Supporter
  • Posts

    257
  • Joined

  • Last visited

  • Days Won

    2

bschelle last won the day on May 28 2019

bschelle had the most liked content!

About bschelle

Previous Fields

  • Car Model and Year
    2007 DTS + 91 Eldo(RET)+99 Deville(RET)
  • Engine
    Northstar 4.6L V8 (LD8/L37)

Contact Methods

  • Website URL
    http://
  • ICQ
    0

Profile Information

  • Location
    Lake County, IL

Recent Profile Visitors

4,240 profile views

bschelle's Achievements

  1. Save your time. I learned that the sensor wont work and I will need to attach to the CHMSL to get a positive connection only when the brakes are applied. There is not any controller connections on the DTS.
  2. I am installing a trailer brake controller in my 2007 DTS. I need to attach a wire from the controller to the cold side of the pedal sensor. Anybody know which wire that is or do you have a schematic of the wiring to the sensor?
  3. My 07 DTS has the head gasket problem. I am taking it to a place to have the heads studded. What else should I consider changing during the repair? Any suggestions? I have 170,000 on the clock.
  4. My 07 DTS misfires when it just gets to operating temp and after about 5 miles it smooths out and doesn't do it again for the rest of the day.I replaced the #2 coil but it still does it. If I let it warm up for about 15 minutes it doesn't do it. Any suggestions? P0302 indicates that cylinder number 2 is experiencing misfires. When the code P0352 is set in the Powertrain Computer, it means that the Powertrain Computer or PCM is not seeing the proper electrical signals from the ignition coil(s) during normal operation.
  5. I reinstalled the battery cables and it seems OK. I drove 10 miles and it didn't blink.
  6. My 91 Eldo just had the dash go dark. No lights anywhere. No codes either. It runs and drives OK but the dash going dark is a problem. It did it while I was driving and came back by itself. It did it numerous times but never quit running. I have the battery on a charger to see if maybe it is the problem. Any suggestions?
  7. It is fixed. I dropped the a/c compressor to make it easier to get to the hose. I used 3/4 silicone heater hose. I also replaced the lower hose. I cut it to drain the system so I didn't have to mess with the radiator. I have not had the a/c working and I installed the compressor without the hoses just to avoid trying to find a belt to work bypassing the a/c. It is now just dead heading to keep the stock belt.
  8. I will be doing the deed this week. I am still going to cut the hose. I do not want to take a chance of messing up the radiator.
×
×
  • Create New...